Carel pCO1 series User Manual

pCO Sistema
Code: +030220336 - rel. 1.5 - 22/12/10
69
Connectable devices
Connectable devicesConnectable devices
Connectable devices
Remote CAREL supervisor or remote WinLoad.
Specifications
SpecificationsSpecifications
Specifications
The following variables can be exchanged across the connection to a remote CAREL supervisor:
127 analogue – 127 integer – 199 digital. If the system variable BMS_EXTENSION= 0
207 analogue – 207 integer – 207 digital. If the system variable BMS_EXTENSION= 1
The following operations can be performed across the remote WinLoad connection:
- update the application files (*.IUP – *.BLB – flash1.BIN - *.DEV);
- update the log files (*.PVT – *.LCT);
- acquire the logged data;
- acquire the parameters in buffer memory.
10.12 GSM protocol (GSM modem)
The GSM protocol allows the pCO controllers to automatically connect to a remote CAREL supervisor and be called by a remote CAREL supervisor or by a remote
WinLoad application (see note after Tab. 10.p). All the supervision and management operations already described for the PSTN protocol can thus be performed. In
addition to these functions, the GSM protocol is used to send and receive SMS messages over the GSM network using the wireless modems that support this function;
the SMS messages are sent upon certain events or alarms, according to rules that are established in the application program.
pCO model
pCO modelpCO model
pCO model
Serial port
Serial portSerial port
Serial port
How to select the protocol
How to select the protocolHow to select the protocol
How to select the protocol
pCO
2
1
–
BMS
SERIAL1_PROTOCOL = 10 for Kyocera (not GSM
): SERIAL1_PROTOCOL = 11
pCO
1
1
–
BMS
SERIAL1_PROTOCOL = 10 for Kyocera (not GSM): SERIAL1_PROTOCOL = 11
2
–
FieldBus
SERIAL2_PROTOCOL = 10 for Kyocera (not GSM): SERIAL2_PROTOCOL = 11
pCO
XS
1
–
BMS
SERIAL1_PROTOCOL = 10 for Kyocera (not GSM): SERIA
L1_PROTOCOL = 11
pCO
C
1
–
BMS
SERIAL1_PROTOCOL = 10 for Kyocera (not GSM): SERIAL1_PROTOCOL = 11
pCO
3
1
–
BMS
SERIAL1_PROTOCOL = 10 for Kyocera (not GSM): SERIAL1_PROTOCOL = 11
2
–
FieldBus
SERIAL2_PROTOCOL = 10 for Kyocera (not GSM): SERIAL2_PROTOC
OL = 11
Tab 10.p
Tab 10.pTab 10.p
Tab 10.p
Note for pCO
Note for pCONote for pCO
Note for pCO
1
11
1
and pCO
and pCOand pCO
and pCO
3
33
3
:
::
: the protocol cannot be activated on more than one serial port at the same time.
Note for pCO
Note for pCONote for pCO
Note for pCO
1
11
1
and pCO
and pCOand pCO
and pCO
3
33
3
:
::
: the protocol cannot be activated on more than one serial port at the same time and is incompatible with the PSTN protocol and the Winload protocol.
Note for
Note for Note for
Note for pCO
pCOpCO
pCO
2
22
2
, pCO
, pCO, pCO
, pCO
1
11
1
128KB, pCO
128KB, pCO128KB, pCO
128KB, pCO
XS
XSXS
XS
128KB, pCOC:
128KB, pCOC: 128KB, pCOC:
128KB, pCOC: the protocol is also incompatible with CAREL Slave and Modbus.
Note for pCO
Note for pCONote for pCO
Note for pCO
1
11
1
512KB, pCO
512KB, pCO512KB, pCO
512KB, pCO
XS
XSXS
XS
512KB, pCO
512KB, pCO512KB, pCO
512KB, pCO
3
33
3
: if set on the BMS serial the protocol is incompatible with CAREL Slave only if the latter is set on the pLAN serial port.
Note for pCO
Note for pCONote for pCO
Note for pCO
1
11
1
512KB, pCO
512KB, pCO512KB, pCO
512KB, pCO
XS
XSXS
XS
512KB, pCO
512KB, pCO512KB, pCO
512KB, pCO
3
33
3
:
::
: the remote WinLoad connection is not possible on the FieldBus serial port.
Note:
Note: Note:
Note: with the Kyocera wireless modem (not GSM) only the remote supervisor connection is possible.
Connectable devices
Connectable devicesConnectable devices
Connectable devices
Remote CAREL supervisor or remote WinLoad.
To establish the connection to the supervisor or WinLoad, connect the pCO to a GSM modem; recommended models are Wavecom WMOD2B*, FALCOM A2D* or
Siemens TC35*.
Specifications
SpecificationsSpecifications
Specifications
The following variables can be exchanged across the connection to a remote CAREL supervisor:
127 analogue – 127 integer – 199 digital. If the system variable BMS_EXTENSION= 0
207 analogue – 207 integer – 207 digital. If the system variable BMS_EXTENSION= 1
The following operations can be performed across the remote WinLoad connection:
- update the application files (*.IUP – *.BLB – flash1.BIN - *.DEV);
- update the log files (*.PVT – *.LCT);
- acquire the logged data;
- acquire the parameters in buffer memory.
In addition, SMS messages can be exchange, as follows:
- send the pCO a suitably formatted SMS to set the supervisor variables;
- send, from the pCO, SMS messages in the desired format to signal alarms or any other information specified by the application.
10.13 MP-Bus protocol
The MP-Bus protocol is used to manage the BELIMO series actuators, exchanging variables, writing the configuration parameters and reading the values of any probes
connected to the actuators.
pCO model
pCO modelpCO model
pCO model
Serial port
Serial portSerial port
Serial port
How to select the protocol
How to select the protocolHow to select the protocol
How to select the protocol
pC
O
1
2 – FieldBus
SERIAL2_PROTOCOL = 1
pCO
XS
pCO
3
Connectable devices
Connectable devicesConnectable devices
Connectable devices
Maximum 8 Belimo actuators.
Specifications
SpecificationsSpecifications
Specifications
Baud rate: 1200 bps
Exchangeable variables: specific commands for the actuator used
Connectable devices: 8
Type of cable / max. distance: AWG 20/22 shielded cable / max 30 m total

Carel pCO1 series Specifications

General

Brand	Carel
Model	pCO1 series
Category	Controller
Language	English