Carel pCO2 Series Manual

Standard Shelter
Cod. +030221471 – Rel. 2.0 – April 01, 2003
25
15 SCREENS
The screens are sub-divided into 5 categories:
• USER screens, not password-protected: these are located in all the branches, except for “prog” and “menu+prog”, and show the values read by
the probes, the status of the alarms, the operating hours of the devices, the time and date; they are also used to set the temperature and humidity
set point and the clock. These screens are indicated by the “!” symbol in the following table of parameters.
• USER screens, password-protected (1234, modifiable): these are accessed by pressing the “prog” button, and are used to set the main functions
(times, set points, differentials) for the devices connected; the screens that relate to functions that are not available are not displayed. These
screens are indicated by the “"” symbol in the following table of parameters.
• MAINTENANCE screens, password-protected (1234, modifiable): these are accessed by pressing the “maintenance” button, and are used for
performing the periodical checks on the devices, calibrating the probes, modifying the operating hours and manually activating the devices.
These screens are indicated by the “#” symbol in the following table of parameters.
• MANUFACTURER screens, password-protected (1234, modifiable): these are accessed by pressing the “menu+prog” buttons and are used to
configure the shelter, enable the main functions and select the devices connected. These screens are indicated by the “$” symbol in the
following table of parameters.
15.1 LIST OF THE SCREENS
The following list shows the screens available on the display. The columns in the table represent the loop of screens, with the first screen (A0, B0…)
being the one that is displayed when pressing the corresponding button, after which the arrow buttons can be used to scroll the other screens. The
codes (Ax, Bx, Cx…) are displayed in the top right corner of the screens, making them easy to identify. The meaning of the symbols !, "… is
explained in the previous paragraph. The annotation PSW indicates screens that are protected by password.
+
!
M0
!
A0
!
H0
!
I0
!
K0
!
S0
PSW P0 PSW Z0
!
M1
!
A1
!
H1
!
I1
!
S1
"
P1
$
Z1
!
M2
!
A2
!
I2
"
P2
CONFIGURATION
→
$
C0
!
A3
!
I3
"
P3
$
C1
PSW A4
!
I4
"
P4
$
C2
#
A5
!
I5
"
P5
$
C3
#
A6
!
I6
"
P6
$
C4
#
A7
!
I7
"
P7
$
C5
#
A8
!
I8
"
P8
$
C6
#
A9
!
I9
"
P9
$
C7
#
Aa
!
Ia
"
Pa
$
C8
#
Ab
!
Ib
"
Pb
$
C9
#
Ac
!
Ic
"
Pc
$
Ca
#
Ad
!
Id
"
Pd
$
Cb
#
Ae
!
Ie
"
Pe
$
Cc
#
Af
!
If
"
Pf
$
Cd
#
Ag
!
Ig
"
Pg
$
Ce
#
Ah
!
Ih
"
Ph
$
Cf
#
Ai
!
Ii
"
Pi
$
Cg
#
Aj
!
Ij
$
Ch
#
Ak
!
Ik
PARAMETERS
→
$
G0
#
Al
!
Il
$
G1
!
Im
$
G2
!
In
$
G3
!
Io
$
G4
!
Ip
$
G5
!
Iq
$
G6
!
Ir
$
G7
!
Is
$
G8
!
It
$
G9
!
Iu
$
Ga
!
Iv
$
Gb
$
Gc
$
Gd
$
Ge
CAREL EXV DRIVER
→
$
F0
$
F1
$
F2
$
F3
$
F4
$
F5
$
F6
$
F7
$
F8
$
F9
$
Fa
$
Fb

Carel pCO2 Series Specifications

General

Brand	Carel
Model	pCO2 Series
Category	Controller
Language	English