4
STANDARD FEATURES AND ACCESSORIES
Ease Of Installation
Mounting Brackets S
Low Voltage Controls S
Comfort Features
Microprocessor Controls S
Wireless Remote Control S
Automatic Air Sweep S
Air Direction Control S
Auto Restart Function S
Cold Blow Protection On Heat Pumps S
Turbo Mode On Siz es 9K and 12 K S
Auto Changeover On Heat Pumps S
Energy Saving Features
Sleep Mode S
Stop/Start Timer S
Safety And Reliability
3MinuteTimeDelayForCompressor S
Over Current Protection For Compressor S
Indoor Coil Freeze Protection S
Indoor Coil High Temperature Protection On Heat Pumps S
Condenser High Temperature Protection On heat Pumps{ S
Accumulator On Heat Pumps S
Ease Of Service And Maintenance
Cleanable Filters S
Diagnostics S
Liquid Line Pressure Taps S
Suction And Discharge Pressure Taps (Sizes 18 and 24K) S
Application Flexibility
Low Ambient C ontrols (---20° F) A
Condensate Pumps A
Crankcase Heater A
Wind Baffles F
Warranty
5 ---Year Compressor Warranty S
1 --- Parts Warranty S
Compressor Extend ed Warranty Years 6 Thru 10 O
All Parts And Labor Years 2 Thru 5 O
All Parts And Labor Years 2 Thru 5, Compressor Years 6
Thru 10
O
{ Sizes 18k & 24k
Legend
SStandard
A Accessory
OOptional
F Field Fabricated
INDOOR UNITS
A07892
Fig. 1 – Condensate Pump Accessory
On high wall fan coils, the condensate pump has a lift capability of
12 ft (3.6 m) on the discharge side with the pump mounted in the
fan coil or 6 ft (1.8 m) on the suction side if the pump is remote
mounted. The pump is recommended when adequate drain line
pitch cannot be provided, or when the condensate must move up to
exit.
NOTE: An external 115v power source will be required to run the
pump on unit sizes 9k and 12k.
OUTDOOR UNITS
LOW AMBIENT KIT
The kit controls condenser fan cycling using a pressure switch. It is
specifically designed to control fan--motor cycles in response to
saturated condensing pressure. This device maintains a constant
saturated condensing temperature of 100 _F ± 10 _F (37.78_C ±
--12.22 _C) at outdoor--air temperatures between 55 _F and --20 _F
(12.78_C ± --12.22_C), and can be used on all outdoor units
without changing the outdoor fan motor.
CRANKCASE HEATER
Available for units with rotary compressors. Heater clamps around
compressor oil sump. Recommended for low--ambient applications
on sizes 9, 12 , 18, 24 and long line applications.
AHRI* CAPACITY RATINGS
OUTDOOR
SECTION
INDOOR
SECTION
STANDARD CFM
COOLING BTUH SEER
HIGH HEAT
Outdoor Indoor BTUH HSPF
3 8 M V C 0 0 9 --- --- --- 1 40 M V C 0 0 9 --- --- --- 1 1000 325 9,200 13 N/A N/A
3 8 M V C 0 1 2 --- --- --- 1 40 M V C 0 1 2 --- --- --- 1 1000 425 11,400 13 N/A N/A
3 8 M V C 0 1 2 --- --- --- 3 40 M V C 0 1 2 --- --- --- 3 1000 425 11,800 13 N/A N/A
3 8 M V C 0 1 8 --- --- --- 3 40 M V C 0 1 8 --- --- --- 3 1600 630 17,500 13 N/A N/A
3 8 M V C 0 2 4 --- --- --- 3 40 M V C 0 2 4 --- --- --- 3 1600 750 22,000 13 N/A N/A
3 8 M V Q0 0 9 --- --- --- 1 4 0 M V Q 0 0 9 --- --- --- 1 1000 325 9,600 13 9,400 7.7
3 8 M V Q0 1 2 --- --- --- 1 4 0 M V Q 0 1 2 --- --- --- 1 1000 425 11,500 13 11,500 7.7
3 8 M V Q0 1 2 --- --- --- 3 4 0 M V Q 0 1 2 --- --- --- 3 1000 425 12,000 13 11,500 7.7
3 8 M V Q0 1 8 --- --- --- 3 4 0 M V Q 0 1 8 --- --- --- 3 1600 560 17,500 13 17,000 7.7
3 8 M V Q0 2 4 --- --- --- 3 4 0 M V Q 0 2 4 --- --- --- 3 1600 750 22,500 13 21,500 7.7
*Air Conditioning, Heating & Refrigeration Institute
Legend
HSPF --- Heating Seasonal Performance Factor
SEER --- Seasonal Energy Efficiency Ratio
NOTES:
1. Ratings are net values reflecting the effects of circulating fan heat. Ratings are based on: Cooling Standard: 80_F (26.67_C) db, 67_F (19.44_C) wb air
entering indoor unit and 95_F(35_C) db air entering outdoor unit. High Temperature Heating Standard: 70_F (21.11_C) db air entering indoor unit and 47_F
(8.33_C) db, 43_F (6.11_C) wb air entering outdoor unit.
2. Ratings are based on 25 ft. (7.62 m) of interconnecting refrigerant lines.
3. All system ratings are based on fan coil units operating at h igh fan speed. Consult Physical Data tables for airflows at al l available fan speeds.
38/40MVC, MVQ