2
STANDARD FEATURES
S Grooved copper tubing
S Lanced sine--wave aluminum fin
S Fully--wettable coil
S High--impact thermoplastic condensate pan
S Primary and secondary drain connections with brass inserts
S Multipoise design for maximum versatility
S Unique cabinet design that meets new stringent regulations for air leakage. Meets requirements of a 2% cabinet leakage rate when tested
at 1.0 inches of static pressure.
S Field--installed heater packages from 3--30 kW (fused, circuit breaker, or non--fused)
S Control board with built--in, replaceable 5--amp blade--type auto fuse
S 2--speed motor in 018 through 036 sizes
S 3--speed motor in 042 through 060 sizes
S Cooling controls
S Time--delay relay (TDR)
S Pre--painted galvanized steel cabinet (gray)
S High--density, super thick R -- 4.2 insulation
S Newly--improved filter rack area -- filter door insulation added for an improved air seal
S Sweat connections
S Inspection plate for cleaning A--coil design
S HUD approved for manufactured housing
S 40--VA, 208/230v transformer
S All models listed with UL (U.S. and Canada) and ARI
ADDITIONAL FEATURES
FY4A
S Puronr refrigerant factory -- installed thermostatic expansion valves (TXV)
S Factory--installed heaters available
S ArmorCoatt coil protection available
FA4C
S R-- 22 refrigerant factory -- installed thermostatic expansion valves (TXV)
S 018--060 sizes available with or without factory-- installed disconnect
S Factory--installed heaters available
FY4A / FA4C
To Next Page
Loading...
Need help?
General
