Carrier Performance Series User Manual

19
Viewing Reminder Status
You can quickly view the status of your reminders on the thermostat using the Reminder Status screen. The reminder status is displayed as a
percentage of time used based on your reminder settings.
On the Thermostat:
S Touch Menu > Alerts > Reminder Status
Configuring Reminders & Alert Preferences
Your thermostat has several types of alerts which can enabled and customized based on your preferences.
NOTE: Only the options relevant to your heating and cooling system will be shown.
On Thermostat:
1. Touch Menu > Alerts > Preferences
2. Configure each reminder/alert setting as needed.
On Web Portal:
1. Select Reminders & Alerts tile.
2. Touch Preferences.
3. Configure each reminder/alert setting as needed.
Service Reminder
Generates a reminder that regularly scheduled maintenance of your heating and cooling system is required.
You can adjust:
S Enable/Disable: Configures whether or not to generate an alert.
S A duration between scheduled maintenance of 1 month and 12 months.
S The date maintenance was most recently performed.
Filter Reminder
Generates a reminder that indicates it is time to clean or replace your filter.
You can adjust:
S Enable/Disable: Configures whether or not to generate an alert.
S Units: Adjust how the duration between filter changes is calculated. Select months or hours your heating and cooling system operated.
S Duration between filter changes ranging between 1 month - 12 months (month duration) or 800 hours - 7200 hours (operation hours
duration)
S The date your filter was last changed.
Ventilator Filter Reminder
Generates a reminder that indicates it is time to clean or replace your ventilator filter.
You can adjust:
S Enable/Disable: Configures whether or not to generate an alert.
S Units: Adjust how the duration between filter changes is calculated. Select months or hours your heating and cooling system operated.
S Duration between filter changes ranging between 1 month - 12 months (month duration) or 800 hours - 7200 hours (operation hours
duration).
S The date your filter was last changed.
UV Lamp Reminder
Generates a reminder that it is time to replace the UV bulb.
You can adjust:
S Enable/Disable: Configures whether or not to generate an alert.
S Units: Adjust how the duration between UV bulb changes is calculated. Select months or hours your heating and cooling system operated.
S Duration between UV bulb changes ranging between 1 month - 12 months (month duration) or 800 hours - 7200 hours (operation hours
duration)
S The date your UV bulb was last changed.
Low Temperature Alert
When enabled, an alert will be sent if your home’s temperature reaches this setting. You can adjust:

Carrier Performance Series Specifications

General

Brand	Carrier
Model	Performance Series
Category	Thermostat
Language	English