Cascade D Series Service Manual

669224-R5
1
NTRODUCTION
I
1.1 Introduction
This Manual provides the Installation, Periodic
Maintenance, Troubleshooting, Service and Specifications
for Cascade D-Series Non-Sideshifting Clamps,
Sideshifting Clamps and 40D Turnaforks.
In any communication about the attachment, refer to the
product I.D. number stamped on the nameplate as shown.
If the nameplate is missing, the numbers can be found
stamped on the right front web of the baseplate.
IMPORTANT: All hoses, tubes and fittings on these
attachments are JIC.
NOTE: Specifications are shown in both inch and (Metric)
units.
1.2 Special Definitions
The statements shown appear throughout this Manual
where special emphasis is required. Read all WARNINGS
and CAUTIONS before proceeding with any work.
Statements labeled IMPORTANT and NOTE are provided
as additional information of special significance or to make
your job easier.
WARNING - A statement preceded by
WARNING is information that should be
acted upon to prevent bodily injury. A
WARNING is always inside a ruled box.
CAUTION - A statement preceded by CAUTION is
information that should be acted upon to prevent
machine damage.
IMPORTANT - A statement preceded by IMPORTANT is
information that possesses special significance.
NOTE - A statement preceded by NOTE is information that
is handy to know and may make your job easier.
cascade
®
cascade
®
CL1159.eps
Nameplate
Nameplate

Cascade D Series Specifications

General

Brand	Cascade
Model	D Series
Category	Power Tool
Language	English