6
669224-R5
NSTALLATION
I
4
5
Flush hydraulic supply hoses
A Install hoses using union fittings.
B Operate valves for 30 Seconds.
C Remove union fittings.
Mount attachment on truck
carriage
A Center truck behind attachment.
B Tilt forward and raise carriage into position.
C Engage the mounting hook tab with the
closest upper carriage bar notch. Raise
the truck carriage into position behind the
attachment.
D Lift attachment off the pallet.
NOTE: The attachment may not be perfectly
centered on the carriage bar when the
mounting hook tab is engaged in the closest
carriage notch. This is normal.
NOTE: The lower hooks cannot be properly
installed if the upper hook tab is not engaged in
the carriage notch.
CL0449.ai
CL0912.ai
Tab
C
WARNING: The mounting hooks must
properly engaged with the upper carriage
bar. The tab on the left mounting hook
must be engaged in a mating notch on the
upper carriage bar.
To Next Page
Loading...
Need help?
General
