Cascade H Series User Manual

i
CONTENTS
INTRODUCTION
6095756-R2 EN
Introduction i
Special Definitions 1
Recommended Hydraulic Supply 1
Truck Requirements 2
Swing Control Valve Installation 3
Attachment Installation 8
Periodic Maintenance 15
Nameplate Icons 17
This manual provides installation instructions and periodic
maintenance requirements for the Cascade H-Series Swing
Frame Paper Roll Clamps.
In any communication about the attachment refer to the
product catalog and serial numbers stamped on the
nameplate. If the nameplate is missing, the numbers can
be found stamped on the front of the faceplate top or side.
IMPORTANT: Supply input fittings are JIC.
NOTE: Specifications are shown in Metric units. All
fasteners have a torque value range of ±10% of stated
value.
30H-RES-B001
VER756971
RC3753.eps
30H-RES-B001
VER756971
Nameplate

Cascade H Series Specifications

General

Brand	Cascade
Model	H Series
Category	Power Tool
Language	English