Casio 5554 User Manual

●
Getting Ready
To enable the most accurate step count, wear
the watch with the face on the outside of your
wrist and tighten the band securely. A loose
band may make it impossible to obtain correct
measurement.
×○
●
Counting Steps
The pedometer will start counting your steps
when you start walking. The step indicators
show whether or not the step count is being
incremented.
Alternating at one-second intervals: Walking
(step count being incremented)
Both displayed: Not walking (step count not
being incremented)
Step indicators
●
To check the step count
l
Displaying the Step Count
Displaying the Step Count
1.
Enter the Timekeeping Mode.
l
Navigating Between Modes
2.
Use (B) to display the step count.
B
BB
B
Seconds
Step count
Hour, minute, second,
day of the week
Month, day, second, day of the week
Step count graph
Daily step count
●
Interpreting the Step Count Graph
The Step Count Graph shows the number of
steps (up to 1,000) you have taken each hour.
This lets you easily check your walking pace
over the past 10 or 11 hours.
●
The Step Count Graph is not displayed
while the step count is zero.
●
Graph contents are normally updated at the
top of each hour.
110
1‒250
251‒500
501‒750
751‒1000
1001‒
Current
Time
Step count
●
Checking Your Progress to Your Daily
Step Target
The graphic display area shows your current
progress toward achieving the daily step
target specified by you.
Example: Daily target of 10,000 steps
10,000 steps (goal attained)
5,000 steps
1,000 steps
0 steps
Note
●
The step count can show a value up to
999,999 steps. If the step count
exceeds 999,999, the maximum value
(999,999) remains on the display.
●
The step count is not displayed during
the first 10 seconds of a walk in order
to avoid miscounting of non-walking
movements. After you have been
walking for about 10 seconds, the
count appears, including the steps you
took during the previous 10 seconds.
●
Graph contents are normally updated
at the top of each hour.
●
The step count is reset to zero at
midnight each day.
●
To save power, measurement stops
automatically if you take off the watch
(no detectable watch movement) and
you do not perform any operation for
two or three minutes.
●
They are also updated when any one
of the events below occurs.
ー
When accelerometer operation is
stopped to save power
ー
When counting is not possible due to
accelerometer error or insufficient
power
Operation Guide 5554
9

Casio 5554 Specifications

General

Brand	Casio
Model	5554
Category	Watch
Language	English