5. If the hour hand and minute hand are not
at 12 o’clock, use (A) and (D) to align them.
Note
●
The hour hand moves in accordance
with minute hand movement. Your
button operations control movement of
the minute hand only.
6. Press (B) to exit the setting screen.
Other Settings
This section explains other watch settings you
can configure.
Changing the Date Display
Format
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (B) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
3. Press (C) six times.
This displays a screen for selecting the
date display format.
4. Use (D) to select a date display format.
M: Month
DD: Day
5. Press (B) to exit the setting screen.
Specifying the Day of the
Week Language
You can select any one of six languages for
the day of the week display in the Timekeeping
Mode.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (B) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
3. Press (C) 10 times.
This causes the language setting to flash.
4. Use (D) to select a language.
[ENG]: English
[ESP]: Spanish
[FRA]: French
[DEU]: German
[ITA]: Italian
[PyC]: Russian
5. Press (B) to exit the setting screen.
Enabling or Disabling the
Appointment Timer
Notification Sound
Use the procedure below to enable or disable
the appointment timer notification sound.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (B) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
3. Press (C) 11 times.
This causes [BEEP] or [OFF] to flash on
the display.
4. Use (D) to select [BEEP] or [OFF].
[BEEP]: Beep enabled.
[OFF]: Beep disabled.
5. Press (B) to exit the setting screen.
Operation Guide 5618
14
To Next Page
Loading...
Need help?
General
