Casio 5618 User Manual

2.
X
Hold down (D) for at least five seconds.
The phone will sound a tone when it
establishes a connection with the watch.
●
It will take a few seconds before the
phone tone sounds.
ConnectedSearching for phone
3.
X
Press any button to stop the tone.
●
You can press any watch button to stop
the phone tone only during the first 30
seconds after it starts to sound.
Note
●
Connection with your phone is not
possible while the watch’s Airplane
Mode is enabled. To connect with your
phone, disable the Airplane Mode.
l
Using the Watch in a Medical
Facility or Aircraft
Configuring Watch Settings
You can use EDIFICE Connected to specify
the interval for acquiring the latest
appointments from your phone, to enable or
disable the watch operation tone, and to
configure other settings.
●
Make sure that the
e
symbol is shown on the
watch display when you perform the
procedure below.
●
If
e
is not displayed, refer to the information
at the link below.
l
Connecting with a Phone
1.
Y
Tap the “EDIFICE Connected” icon.
2.
Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Changing the Home City
Summer Time Setting
●
Make sure that the
e
symbol is shown on the
watch display when you perform the
procedure below.
●
If
e
is not displayed, refer to the information
at the link below.
l
Connecting with a Phone
1.
Y
Tap the “EDIFICE Connected” icon.
2.
Y
Perform the operation shown on the
phone screen to change your Home City
summer time setting.
Connection
Connecting with a Phone
Your watch can connect with a phone that is
paired with it.
●
If the watch is not paired with the phone you
want to connect with, refer to the information
below and pair them.
l
C
Pair the watch with a phone.
● Connecting with a Phone
If
e
does not appear on the watch display even
though it is paired with your phone, hold down
(D) for at least two seconds to connect with
your phone.
●
Once the watch and phone are connected,
the connection is maintained.
Important!
●
If you have problems establishing a
connection, it could mean that
EDIFICE Connected is not running on
your phone. On your phone’s home
screen, tap the “EDIFICE Connected”
icon. After the app starts up, hold down
the watch’s (D) button for at least two
seconds.
Unpairing
Unpairing the watch from a phone requires
both EDIFICE Connected and watch
operations.
Note
●
If you are using an iPhone, also delete
the pairing information stored on the
phone.
● Deleting Pairing Information from
EDIFICE Connected
1.
Y
Tap the “EDIFICE Connected” icon.
2.
Y
Perform the operation shown on the
phone screen to unpair.
● Deleting Pairing Information from the
Watch
1.
X
Hold down (C) for at least two seconds
to enter the Timekeeping Mode.
2.
X
Hold down (B) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
Home City
3.
X
Press (C) 3 times.
This causes the seconds to flash.
Seconds
4.
X
Hold down (A) for at least two seconds.
Release it when [CLR] stops flashing.
This deletes the pairing information from
the watch.
5.
X
Press (B) to return to the Timekeeping
Mode.
● iPhone Only
Deleting the phone’s pairing
information
For details about setting procedures, see your
phone documentation.
“Settings”
n
“Bluetooth”
n
Cancel the watch’s
device registration.
If you purchase another phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
l
Deleting Pairing Information from the
Watch
l
C
Pair the watch with a phone.
Operation Guide 5618
9

Casio 5618 Specifications

General

Brand	Casio
Model	5618
Category	Watch
Language	English