Important!
●
The watch may not be able to perform
auto time adjustment under the
conditions described below.
ー
While the watch is too far away from
its paired phone
ー
While communication is not possible
due to radio interference, etc.
ー
While the phone is updating its
system
ー
While CASIO WATCHES is not
running on the phone
Note
●
If the watch does not indicate the
correct time even if is able to connect
with a phone, adjust the hand
positions.
l
Adjusting Hand Alignment
●
If there is a World Time City specified
with CASIO WATCHES, its time will
also be adjusted automatically.
●
Auto time adjustment is performed at
the times described below.
ー
After your phone’s time zone or
summer time setting is changed
ー
After 24 hours or more have passed
since the last time adjustment using
Bluetooth connection
ー
After 24 hours or more have passed
since city swapping using CASIO
WATCHES or watch operation
ー
After 24 hours or more have passed
since the last home city change or
time adjustment using watch
operation
●
Watch operation can be performed
even while it is connected with your
phone.
●
Triggering Immediate Time Adjustment
The watch’s time setting is adjusted
automatically whenever you pair it with a
phone. Whenever you want to adjust the
watch’s time setting based on your phone’s
time, perform the procedure below to connect
with a phone.
1.
X
Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Move the phone close to (within one meter
of) the watch.
3.
X
Hold down (D) for at least two seconds.
[CNCT] flashes to indicate that the watch
has started the connection operation.
Once the watch and phone are
connected, [OK] appears, and then the
watch adjusts its time setting based on
information from the phone.
After time
adjustment
Trying to connect
Note
●
Connection with your phone is not
possible while the watch’s Airplane
Mode is enabled. To connect with your
phone, disable the Airplane Mode.
l
Using the Watch in a Medical
Facility or Aircraft
●
The watch remains connected with
your phone even after time adjustment
is complete.
●
If time adjustment fails for some
reason, [ERR] appears.
Using the Schedule Timer
The schedule timer can be linked with the
calendar of a paired phone, so the watch can
display the remaining time of the currently
ongoing scheduled event and/or its ending
time.
Important!
●
The schedule timer becomes disabled
if you manually adjust the watch’s time
setting. Before using the Schedule
Timer, connect the watch with your
phone and sync their time settings.
l
Connecting with a Phone
Note
●
The schedule timer corresponds to the
built-in calendar of your phone’s OS
and Google calendar.
●
When a scheduled start time or end
time is reached, the watch will beep
and display an indication for one or two
seconds.
You can enable or disable the beep
sound as required.
l
Enabling or Disabling the
Schedule Timer Notification
Sound
●
Up to five scheduled events can be
sent from your phone to the watch.
●
Transferring Scheduled Event
Scheduled events can be transferred from
your phone to the watch.
●
While the watch is connected with your
phone, scheduled events are periodically
transferred to the watch automatically.
Check the connection
●
Make sure that the
e
symbol is shown on
the watch display when you perform the
procedure below. If
e
is not displayed,
refer to the information at the link below.
l
Connecting with a Phone
1.
Y
Tap the “CASIO WATCHES” icon.
2.
Y
Perform the operation shown on the
phone screen to transfer phone
scheduled events to the watch.
Watch Operation Guide 5686
10
To Next Page
Loading...
Need help?
General
