Casio 5686 User Manual

Troubleshooting
I can’t pair the watch with a
phone.
Q1
I’ve never been able to establish a
(pairing) connection between the
watch and phone.
Are you using a supported phone model?
Check if the phone model and its
operating system are supported by the
watch.
For information about supported phone
models, visit the CASIO Website.
https://world.casio.com/os_mobile/wat/
Did you install CASIO WATCHES on your
phone?
CASIO WATCHES needs to be installed
on your phone in order to connect with the
watch.
l
A
Install the app on your phone.
Are your phone’s Bluetooth settings
configured correctly?
Configure the phone’s Bluetooth settings.
For details about setting procedures, see
your phone documentation.
iPhone Users
●
“Settings”
n
“Bluetooth”
n
On
●
“Settings”
n
“Privacy”
n
“Bluetooth”
n
“CASIO WATCHES”
n
On
Android Users
●
Enable Bluetooth.
Other than the above.
Some phones need to have BT Smart
disabled to use CASIO WATCHES. For
details about setting procedures, see your
phone documentation.
On the Home Screen, tap: “Menu”
n
“Settings”
n
“Bluetooth”
n
“Menu”
n
“BT Smart settings”
n
“Disable”.
I can’t reconnect the watch
and phone.
Q1
The watch will not re-connect with the
phone after they are disconnected.
Is CASIO WATCHES running?
The watch cannot re-connect with your
phone unless CASIO WATCHES is
running on the phone. On your phone’s
Home Screen, tap the “CASIO
WATCHES” icon. Next, on the watch, hold
down (D) for at least two seconds.
Have you tried turning your phone off and
then back on again?
Turn your phone off and back on, and then
tap the “CASIO WATCHES” icon. Next,
on the watch, hold down (D) for at least
two seconds.
Q2
I can’t connect while my phone is in
the Airplane Mode.
Connection with the watch is not possible
while your phone is in the Airplane Mode. After
disabling the phone’s Airplane Mode, go to the
phone’s Home Screen and tap the “CASIO
WATCHES” icon. Next, on the watch, hold
down (D) for at least two seconds.
Q3
I changed the phone’s Bluetooth
from enabled to disabled, and now I
can’t connect anymore.
On your phone, enable Bluetooth, and then go
to the Home Screen and tap the “CASIO
WATCHES” icon. Next, on the watch, hold
down (D) for at least two seconds.
Q4
I can’t connect after turning off the
phone.
Turn your phone off and back on, and then tap
the “CASIO WATCHES” icon. Next, on the
watch, hold down (D) for at least two seconds.
Q5
e
Is not displayed, and the watch is
not connected with my phone.
Is a setting operation in progress?
Bluetooth connection is temporarily
disabled while any setting operation (time
setting, alarm setting, etc.) is in progress.
Exit the setting operation to re-connect.
Have you performed some watch
operation within the past hour?
To preserve battery power, the watch will
automatically terminate Bluetooth
connection with your phone temporarily if
it detects the connection has been unused
for approximately one hour. Auto Time
Adjustment is disabled while there is no
connection. To reconnect, press any
watch button or angle the watch towards
your face.
Watch Operation Guide 5686
26

Casio 5686 Specifications

General

Brand	Casio
Model	5686
Category	Watch
Language	English