Casio 5686 User Manual

●
Displaying an Scheduled Event
1.
X
Enter the Timekeeping Mode.
l
Navigating Between Modes
2.
X
Press (D).
●
This causes the display to change from
the current time to an event.
Each press of (B) switches between the
information as described below.
Current ongoing
scheduled event end time
Next scheduled
event start time
●
The mode hand indicates the time
remaining until the currently ongoing
event is complete. The mode hand
points to [OVER] when the remaining
time exceeds 120 minutes.
If you do not have scheduled events
which will finish within 24 hours, the
mode hand points to [00].
Mode hand
●
When a scheduled start time or end time
is reached, the watch will beep and
display an indication for one or two
seconds.
You can enable or disable the beep
sound as required.
l
Enabling or Disabling the Schedule
Timer Notification Sound
●
When the remaining time of the
currently ongoing scheduled event is 10
minutes or less, the watch display
shows the remaining time, and counts it
down in one-second units.
Viewing Stopwatch Data
This section explains how to send lap times
(up to 200 records) from watch memory to
your phone, and view it on your phone for with
CASIO WATCHES.
●
Sending Stopwatch Data to a Phone
Use the procedure below to send data from
the watch to a phone.
●
While the watch is connected with your
phone, lap times being recorded by the
watch are periodically transferred to the
phone automatically.
Check the connection
●
Make sure that the
e
symbol is shown on
the watch display when you perform the
procedure below. If
e
is not displayed,
refer to the information at the link below.
l
Connecting with a Phone
1.
Y
Tap the “CASIO WATCHES” icon.
2.
Y
Perform the operation shown on the
phone screen to transfer data measured
by the watch to the phone.
After data transfer is complete, a list of the
measurement data will appear on the
phone display.
●
Tapping a stopwatch data item displays
its details.
●
Checking a Lap Time
Use CASIO WATCHES to check the data you
sent to the phone.
1.
Y
Tap the “CASIO WATCHES” icon.
2.
Y
Perform the operation shown on the
phone screen to view the measurement
data you want.
Note
●
Tapping “Edit” displays a screen that
you can use to change the data item
title and to delete lap time data.
Configuring Timer Settings
Check the connection
●
Make sure that the
e
symbol is shown on
the watch display when you perform the
procedure below. If
e
is not displayed,
refer to the information at the link below.
l
Connecting with a Phone
1.
Y
Tap the “CASIO WATCHES” icon.
2.
Y
Perform the operation shown on the
phone screen to configure the timer time
setting.
Setting the Alarm
Check the connection
●
Make sure that the
e
symbol is shown on
the watch display when you perform the
procedure below. If
e
is not displayed,
refer to the information at the link below.
l
Connecting with a Phone
1.
Y
Tap the “CASIO WATCHES” icon.
2.
Y
Perform the operation shown on the
phone screen to configure alarm time
settings.
Watch Operation Guide 5686
11

Casio 5686 Specifications

General

Brand	Casio
Model	5686
Category	Watch
Language	English