Moving to Another
Time Zone
When you enter another time zone, the watch
will adjust its time setting to your current
location in accordance with the time zone of
your phone. When you reach your destination,
disable the watch Airplane Mode.
1. When you reach your destination,
establish a connection between the watch
and your phone.
l
Using the Watch in a Medical Facility or
Aircraft
After you disable the watch’s Airplane
Mode, it will adjust its time setting to the
time in your current location.
●
If you want to trigger immediate time
adjustment, refer to the information at
the link below.
l
Triggering Immediate Time
Adjustment
Stopwatch
The stopwatch measures elapsed time in
1/1000-second units for the first hour, and in
1/10-second units after that for up to 24 hours.
In addition to normal elapsed time
measurements, the stopwatch also lets you
measure lap times.
Note
●
Up to 200 lap time records can be
stored in watch memory. Performing a
split time operation while there are
already 200 records in memory will
cause the oldest record to be deleted
automatically to make room for the new
one.
●
You can use CASIO WATCHES to
view past measurement data.
Lap Times
A lap time is the time elapsed during a specific
lap or segment. Lap times are recorded
internally by the watch. The watch displays the
elapsed time of the current lap.
D
Start
B
Lap 1
B
D
Goal
Lap 2
Lap 3
Note
●
Lap times can be viewed with CASIO
WATCHES after measurement is
complete.
l
Viewing Stopwatch Data
Measuring Elapsed Time
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
2. Use the operations below to measure
elapsed time.
●
Elapsed time is shown in 1/1000-
second units for the first hour of the
measurement session. After the first
hour, elapsed time is shown in 1/10-
second units.
1/1000 seconds
Seconds, 1/10 seconds
After first hour
First hour
Hours, minutesMinutes,
seconds
3. Press (B) to reset the stopwatch to all
zeros.
Watch Operation Guide 5686
19
To Next Page
Loading...
Need help?
General
