●
Specifying the Illumination Duration
You can select either 1.5 seconds or three
seconds as the illumination duration.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Loosen the crown and then pull it out.
The currently selected Home City will
appear on the display.
3. Press (B) four times.
[LIGHT] appears on the display with [1] or
[3] flashing.
4. Rotate the crown to select an illumination
duration.
[1]: 1.5-second illumination
[3]: 3-second illumination
5. Push the crown back in and then lock it.
Note
●
If you do not perform any operation for
about two minutes after pulling out the
crown, crown operations will
automatically become disabled. If that
happens, push the crown back in and
then pull it out again.
Useful Features
Pairing the watch with your phone makes a
number of the watch’s features easier to use.
Auto time adjustment
l
Auto Time Adjustment
Selection of More Than 300 World Time
cities
l
Configuring World Time Settings
Use your phone to check the distance and
bearing to a point in Location Memory
l
Checking the Distance and Bearing to a
Location Memory Point (Location Indicator)
Use your phone to record route waypoints
and their altitudes
l
Recording Waypoints and Their Altitudes
(Mission Log)
In addition, a number of other watch settings
can be configured using your phone.
To transfer data to a watch and to
configure settings, you first need to pair
the watch with your phone.
l
Getting Ready
●
Your phone needs to have the CASIO
“CASIO WATCHES” app installed to pair
with the watch.
Watch Operation Guide 5713
14
To Next Page
Loading...
Need help?
General
