E-36
703A-E-038A
4. Use the [+]/[–] buttons to select on or off.
Example: To turn the channel off.
• Press [왖] (EXIT) to return to the channel selection
screen.
• Pressing the MIXER button returns to the Tone Screen.
❚
NOTE
• The MIDI data display shows only the data for the channels
selected with the Mixer.
How Channel On/Off Works
The following describes what happens and what appears on
the display when you turn a channel on or off.
■
On (on)
This setting turns on the currently selected channel, which is
indicated by a bar appearing at the bottom of the level meter
for that channel. This is also the default setting for all chan-
nels when the keyboard is turned on.
■
Off (oFF)
This setting turns off the currently selected channel, which is
indicated by the absence of the bar at the bottom of the level
meter for that channel.
C h a nn e l
On Off
V o l u m e
Indicates channel volume of 127
V o l u m e
Using the Parameter Edit Mode
In the Parameter Edit Mode, you can change the settings of
ten different parameters (including tone, volume, and pan
pot) for the channel you selected on the Mixer screen.
To change parameters
1. Use the channel selection screen to select a chan-
nel.
2. Use [왔] (ENTER) to enter the Parameter Edit
Mode.
3. Use [왗] and [
왘] (CURSOR) to select the pa-
rameter whose setting you want to change.
Example: Select volume setting by displaying “Vol-
ume”.
• Each press of [왗] or [왘] (CURSOR) cycles through
the parameters.
4. Use the number buttons or [+] and [–] to change
the parameter setting.
Example: Change the setting to “060”.
• Pressing the MIXER button exits the parameter edit
mode.
• Pressing [왖] (EXIT) returns to the channel selection
screen.
[왔] ENTER
MIXER
[왗]/[왘] CURSOR
SYNTH
[+]/[–]
To Next Page
Loading...
Need help?
General
