Casio DT-X100 Series Software Manual

62
2.9.4 Scan result notification
This function notifies when symbol scanning is complete.
(1) Notification by indicator LED
When scanning is complete, or when it has failed, the indicator LED (the LED on the right front of
the terminal) lights. The following patterns can be set.
Notification device Configuration
Scan
successful
Scan
failed
Scan interrupted
(Trigger key
released)
Remarks
Mode 1 On in
green
On in red None Default
Mode 2 On in
green
None None
Indicator LED
Disabled None None None
(2) Notification by buzzer or audio
A sound is generated by audio or buzzer when scanning is complete. The following patterns can be
set.
Notification device Configuration
Scan
successful
Scan
failed
Scan interrupted
(Trigger key
released)
Remarks
Valid Sounds None None Default
Buzzer/ audio
Disabled None None None
(3) Notification by vibrator
The vibrator is made to vibrate when scanning is completed. The following patterns can be set.
Configuration
Scan
successful
Scan
failed
Scan interrupted
(Trigger key
released)
Remarks
Valid Vibrates None None Default
Vibrator
Disabled None None None
(4) Notification by application
The application program is notified of the scanning result by the returned value and the argument of
the symbol scanning function.
For details, refer to the Imager Library Manual.

Casio DT-X100 Series Specifications

General

Brand	Casio
Model	DT-X100 Series
Category	Handhelds
Language	English