90
3.2 Perform Initial Setup
3.2.1 Welcome Wizard
(1) Startup screen
After the terminal first boots, the following Startup screen will appear. The following settings can be
made from here:
Owner information
Date and time
Execution operation Explanation
Press the Skip button 2. Next, the Properties screen for “Owner Information -> Date/Time” is
displayed.
[Remarks]
[1] Refer to “3.2.2 Date/ Time/ Alarm Setting” for details of “Date/Time”.
[2] Refer to “3.2.3 Owner Information” for details of owner information.
[3] However, everything must be reset in the event of a full reset of the terminal.
To Next Page
Loading...
Need help?
General