E-30
Important!
Both contactless IC cards and RFID tags
The NFC employs a low power radio wave which does not require regulatory
station license.
Frequency band used by the NFC is 13.56 MHz. Secure a suffi cient space
between DT-X200 and other reader/writer located in the vicinity. Make sure also
that a radio station employs the same frequency band does not locate near by
prior to using DT-X200.
Read a contactless IC card or RFID tag by holding the Handheld Terminal so
that the reader port is fl ush against the card or tag.
When holding up the Handheld Terminal, take care not to strike the reader port
against the card or tag.
If the card or tag cannot be read, try moving the Handheld Terminal back and
forth or side to side.
Contactless IC cards
Metal objects near a contactless IC card will interfere with successful reading.
Take the card out of a wallet if the wallet is with metal object before applying it
to the reader port.
The card may not be read correctly if it is overlapped by one or more other
cards.
RFID tags
Metal objects near an RFID tag will interfere with successful reading. Move the
tag away from any nearby metal objects or use a tag designed for use with metal.
The tag may not be read correctly if it is overlapped by one or more other tags.
Set up the Handheld Terminal so that tags can be kept completely apart during
reading.
•
•
•
•
•
•
•
•
•
To Next Page
Loading...
Need help?
General