9
1.2.2 Standard application composition
The application functions installed as standard on the DT-X200 are as follows:
(1) Start-Settings Menu
No Name
説明
1 Bluetooth
Performs power settings and device scans.
2 CPU Speed
Sets the CPU operating speed.
3 IME setting
Sets display/ hide for the IME toolbar.
4 LAN Cradle
Sets IP information (terminal, cradle).
5 USB To PC
Sets the connection method with PC.
6 USB Connection
Displays USB connection status and changes the connection
utility.
7 WLAN Power settings
Makes settings for power to the WLAN module and displays the
detected status.
8 Remove programs
Delete installed programs.
9 IMEJA setting
Makes settings for image scanner reading.
10 Internet option
Set Internet Explorer options.
11 Keyboard
Make settings concerning keyboard operations.
12 Backlight
Sets backlight brightness, auto dimming, and auto off.
13 System
Displays system information and makes settings
14 Scanner setting
Makes settings for laser scanner reading.
15 Stylus
Provides double tapping adjustment and touch screen position
calibration.
16
Client license of a terminal
server
Displays terminal service client authentication licenses.
17 Dial
Makes settings for telephony.
18
Network and dialup
connection
Makes settings for dial-up connection.
19 Version infor
Displays the version of the OS and service pack, etc.
20 Vibrator
Sets the vibrator to enabled or disabled.
21 Password
Set the password to input when the terminal starts up.
To Next Page
Loading...
Need help?
General