141
Using the Camera with a Computer
Install the required software in accordance with what version of the Macintosh OS
you are running and what you want to do.
IMPORTANT!
• The camera does not support operation with Mac OS 8.6 or earlier, or Mac OS X
10.0. Operation is supported with Mac OS 9, X (10.1, 10.2, 10.3, 10.4, 10.5) only.
Use the standard USB driver that comes with your supported operating system.
. To connect the camera to your computer and save files
1. Turn on the camera and press [MENU].
2. On the “Set Up” tab, select “USB” and then press [6].
3. Use [8] and [2] to select “Mass Storage”, and then press [SET].
Using the Camera with a Macintosh
When you want to
do this:
Operating
System
Version
Install this software:
See
page:
Save images to your
Macintosh and view
them there manually
OS 9
Installation not required. 141
OS X
Save images to your
Macintosh
automatically/Manage
images
OS 9
Use commercially available
software.
144
OS X
Use iPhoto, which comes bundled
with your operating system.
Play movies OS 9 / OS X
You can playback with QuickTime,
which comes bundled with your
operating system.
144
Connecting the Camera to Your Computer and Saving Files
To Next Page
Loading...
Need help?
General
Weight and Dimensions
