16
Quick Start Basics
Note that the battery of a newly purchased camera is not charged. Perform the steps
under “To charge the battery” to bring the battery to a full charge.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-40) for
power. Never try to use any other type of battery.
1. Aligning the positive
+
and
negative
-
terminals of the
battery with those of the charger
unit, load the battery into the
charger unit.
2. Plug the charger unit into a
household power outlet.
About 150 minutes are required to
reach full charge. The [CHARGE]
lamp will go out when charging is
complete. Unplug the power cord
from the power outlet and then
remove the battery from the charger.
First, charge the battery prior to use.
To charge the battery
Lamp Status Description
Lit Red Charging
Flashing Red Charger unit or battery problem (page 169)
Off
Charging complete or standing by, due to abnormally
high or low ambient temperature (page 169)
[CHARGE] lamp
To Next Page
Loading...
Need help?
General
Weight and Dimensions
