144
Other Settings (Set Up)
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform
other operations in both the REC mode and PLAY mode.
Procedure
[MENU] * Set Up Tab * Screen
Procedure
[MENU] * Set Up Tab * Eye-Fi
Select “Off” to disable Eye-Fi card communication (page 140).
For information about menu operations, see page 77.
Adjusting Monitor Screen Brightness (Screen)
Auto 2/
Auto 1
With this setting, the camera detects available light levels and
automatically adjusts the brightness of the monitor screen accordingly.
“Auto 2” changes monitor screen brightness relatively more quickly than
“Auto 1” when surrounding light is bright.
+2
Brightness that is greater than +1, which makes the screen easier to view.
This setting consumes more power.
+1 Bright setting for outdoor use, etc. Brightness that is greater than 0.
0 Normal monitor screen brightness for indoor use, etc.
Turning off Eye-Fi Card Communication (Eye-Fi)
To Next Page
Loading...
Need help?
General
