13
Quick Start Basics
Note that the battery of a newly purchased camera is not charged. Perform the steps
below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-80) for
power. Never try to use any other type of battery.
1. Open the battery cover.
2. Load the battery.
With the EXILIM logo on the
battery facing upwards (in the
direction of the monitor screen),
hold the stopper next to the
battery in the direction indicated
by the arrow as you slide the
battery into the camera. Press
the battery in until the stopper
secures it in place.
3. Close the battery cover.
First, charge the battery prior to use.
To load the battery
EXILIM logo
Stopper
Battery
OK
NG
To Next Page
Loading...
Need help?
General
