41
Snapshot Tutorial
You can use this setting to optimize the balance between bright areas and dark areas
when shooting images.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the “Lighting” Control Panel option (page
33).
3. Use [4] and [6] to select the setting you want and then press [SET].
NOTE
• Lighting is disabled during movie recording.
The Silent mode automatically disables flash, mutes operation tones, and configures
other settings to avoid disturbing others around you. It comes in handy when shooting
in a museum or other areas where flash photograph is prohibited.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the “Silent Mode” Control Panel option (page
33).
Optimizing Image Brightness (Lighting)
Setting
REC Screen
Icon Display
Description
On
Performs brightness correction. When this option
is selected, it takes longer for the image to be
stored after the shutter button is pressed.
Off None Does not perform brightness correction.
Shooting without Disturbing Others (Silent Mode)
To Next Page
Loading...
Need help?
General
