65
OTHER RECORDING FUNCTIONS
REC Mode Camera Settings
Specifying ISO Sensitivity
Use the following procedure to select the ISO sensitivity
setting that suits the type of image you are recording.
1.
In the REC mode, press [MENU].
2.
Select the “REC” tab, select “ISO”, and then
press [#].
3.
Use [!] and ["] to select the setting you want
and then press [SET].
To get this:
Automatic sensitivity selection
Conforms with ISO 80
Conforms with ISO 160
Conforms with ISO 320
Conforms with ISO 640
Select this setting:
Auto
ISO 80
ISO 160
ISO 320
ISO 640
IMPORTANT!
• Increasing ISO sensitivity can cause static to appear
inside an image. Select the ISO sensitivity setting
that suits your shooting needs.
• Using a high ISO sensitivity setting along with the
flash to shoot a nearby subject may result in
improper illumination of the subject.
• You can use the key customization feature (page 66)
to configure the camera so the ISO sensitivity setting
changes whenever you press [$] and [#] while in the
REC mode.
To Next Page
Loading...
Need help?
General
