11
Quick Start Basics
Note that the battery of a newly purchased camera is not charged. Perform the steps
under “To charge the battery” to bring the battery to a full charge.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-40) for
power. Never try to use any other type of battery.
1. Positioning the positive
+
and negative
-
terminals of the battery with those of
the charger unit, load the battery into
the charger unit.
2. Plug the charger unit into a
household power outlet.
About 150 minutes are required to reach
full charge. The [CHARGE] lamp will go
out when charging is complete. Unplug the
power cord from the power outlet and then
remove the battery from the charger.
First, charge the battery prior to use.
To charge the battery
Lamp Status Description
Lit Red Charging
Flashing Red Charger unit or battery problem (page 147)
Off
Charging complete or standing by, due to abnormally
high or low ambient temperature (page 147)
[CHARGE] lamp
To Next Page
Loading...
Need help?
General
