58
Using BEST SHOT
A process called “keystone
correction” makes lines straight
and natural, even if rectangular
subjects are shot from an angle.
BEST SHOT has two scenes.
1. Press [BS] and then select the “Business cards and documents” or
“White board, etc.” scene.
2. Press the shutter button to shoot the image.
This image will appear on the monitor screen with a red
boundary around the area that is selected for keystone
correction. If there is a black boundary, it means that the
camera detected more than one area that could be
keystone corrected. Use [
4] and [6] to move the
boundary to the area you want to keystone correct.
• The message “Cannot correct image!” will appear on
the monitor screen if there are no areas that need to be keystone corrected,
and the image will be saved to memory as it is.
3. Use [8] and [2] to select “Correct” and then press [SET].
This will correct the image and save the resulting (corrected) image.
Shooting Images of Business Cards and Documents
Before keystone
correction
After keystone
correction
Business cards and
documents
White board, etc.
To Next Page
Loading...
Need help?
General
