GETTING READY
49
• Make sure you always remove the camera from the
USB cradle before connecting or disconnecting the AC
adaptor.
• Charging, USB data communication, and using the
Photo Stand feature can cause the AC adaptor to
become warm. This is normal and does not indicate
malfunction.
• Unplug the AC power cord from the power outlet
whenever you are not using it.
• Never place a blanket or any other cover on the AC
adaptor. Doing so creates the risk of fire.
Turning the Camera On and Off
■ To turn on the camera
Press the power button, [ ] (REC) or [ ] (PLAY). The
operation lamp will light green momentarily, and then
power will turn on. The mode the camera enters depends
on which button you pressed to turn it on.
Operation lamp
[ ] (REC)
[ ] (PLAY)
Power button
Press this button to turn on the camera:
Power button or [ ] (REC)
[
] (PLAY)
To enter this mode at
startup:
REC
PLAY
To Next Page
Loading...
Need help?
General
