APPENDIX
241
Using the USB Cradle to Connect to a
Computer
You can place the camera onto the USB cradle and
connect the cradle to a computer to view images or to
transfer them to the computer.
IMPORTANT!
• Low battery power can cause the camera to power
down suddenly during data communication. Use of
the special AC adaptor is recommended to power the
camera during data communication.
■ Using the Camera with a Windows Computer
1.
Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle, and then
plug it in to a household power outlet.
• If you are using battery power without the AC
adaptor, make sure that the battery is fully charged.
• Note that the shape of the AC adaptor depends on
the area where you purchased the USB cradle/AC
adaptor.
[DC IN 5.3V]
○○○○○○○○○○○○○○○○○○○○○○○○○○○
[DC IN 5.3V]
To Next Page
Loading...
Need help?
General
