APPENDIX
246
USB Cradle Indicator Lamp Reference
The USB cradle has two indicator lamps: a [CHARGE]
lamp and a [USB] lamp. These lamps light and flash to
indicate the current operational status of the USB cradle
and camera.
[CHARGE] lamp [USB] lamp
Color
Red
Green
Amber
Red
Status
Lit
Lit
Lit
Flashing
Color
Green
Green
Status
Lit
Flashing
Charging
Charging complete
Charge standby
Charge error
USB connection
Accessing memory
Meaning
[USB] lamp
[CHARGE] lamp
9.
Perform the procedure in the camera user’s
guide to view the images on your computer.
10.
To terminate the USB connection, drag the
drive icon that represents the camera to
Trash.
11.
Press the USB cradle’s [USB] button. After
making sure the [USB] lamp is not lit, remove
the camera from the USB cradle.
IMPORTANT!
• Do not disconnect the USB cable, disconnect the AC
adaptor, remove the camera from the USB cradle, or
perform any camera or USB cradle operation while
USB data communication is being performed. Doing
so can cause data to become corrupted.
To Next Page
Loading...
Need help?
General
