EN-6
Chapter 2
Using the fx-CG500 Manager
Note
For details about fx-CG500 applications and operations, see the fx-CG500 User’s Guide.
fx-CG500 Manager Overview
The fx-CG500 Manager puts a virtual fx-CG500 on your computer screen, which you can use to
perform almost all of the operations that are available on your fx-CG500. This section explains the
differences between fx-CG500 Manager operations and the fx-CG500 unit, and among the three
fx-CG500 Manager modes.
Differences between the fx-CG500 Manager and the Functions of fx-
CG500 Applications
The following are the differences between the fx-CG500 Manager and the functions of the fx-
CG500 applications.
• Certain fx-CG500 settings and functions that are not required when running on a computer
(such as touch panel calibration) are disabled on the fx-CG500 Manager. Attempting to access a
disabled setting or function will cause the message “Unavailable” to appear on the display.
• Use the procedure below to install an Add-In application.
1. Use Explorer to open the Home Folder.
2. Copy to the Home Folder the C2A file of the Add-in application you want to install.
3. On your fx-CG500 Manager, display the Application Menu.
• The icon of the Add-In application you installed should be displayed on the Application Menu.
To Next Page
Loading...
Need help?
General
