E-19
IT-G400 Charging Status LED Display
Charging status LED Charging status Remarks
Red Charging
Green Charging complete
Flashing red
Charging error
• Outside the charging
temperature range (0-50°C).
(Charging begins once the
battery pack returns to the
charging temperature range)
If this error occurs, leave the
battery pack at room
temperature for 1 hour and
charge the battery pack after it
returns to room temperature.
Flashing alternately red/green
Battery pack detection error
• Battery pack fault
• Battery pack installed
incorrectly
• Battery pack not installed
Precautions for Use
Depending on the Smart Device condition, it may take some time until the charging
status LED turns on red.
• In high- or low-temperature environments, charging may be restricted to protect the
battery pack. At such temperatures, the level of battery charge may not reach 100%
even when the charging status LED is green and charging is completed.
USB Cradle, LAN Cradle
Charging the battery
pack installed in the
IT-G400
Charging the battery pack
Slide the battery pack
into slots of the cradle
and align the battery
pack terminals with the
battery pack power
contacts.
Align
Cradle charging status LED display
Red: Charging
Green: Charging complete
Red/green alternate fl ashing: Standby because the battery pack is faulty, is installed
incorrectly or is outside the charging temperature range
(Charging begins when temperature returns to the charging
temperature range)
To Next Page
Loading...
Need help?
General