— 4 —
TO RESET THE SF UNIT'S MEMORY
The following procedure erases all data stored in the memory of the SF unit.
Perform the following operation only when you want to delete all data and initialize the settings of the SF
unit.
Remember – you should always keep copies of important data by writing it down, by transferring it to a
personal computer or other SF unit.
To reset the SF Unit's memory
1. Switch on power and press the RESET button with a thin, pointed object.
Warning!
The next step deletes all data stored in the SF unit's memory. Make sure that you really want
to delete the data before you continue!
2. Press Y to reset the memory and delete all data or N to abort the reset operation without
deleting anything.
Following the reset operation described above, the Home Time display appears and the SF unit
settings are initialized as noted below.
Home Time: 12-hour format
JAN/1/1995
AM/12:00 00
World Time: Washington D.C.
Daily Alarm: 12:00 PM
Sound: Schedule alarm → ON
Reminder alarm → ON
Daily alarm → OFF
Key → ON
Character input: CAPS
RESET
RESET button
To Next Page
Loading...
Need help?
General
