Casio XJ-M140 User Manual

E-15
Starting and Stopping Projection
1. Press the [P] (Power) key.
z This causes the confirmation message to appear. If you do not turn off the projector the
confirmation message will disappear automatically after about 10 seconds. The confirmation
message will also disappear if you press the [ESC] key.
2. To turn off the projector, press the [P] (Power) key again in response to the
confirmation message.
3. After checking to make sure that the POWER/STANDBY indicator has stopped
flashing amber and remains lit, unplug the AC power cord from the power outlet.
To turn off the projector
XJ-M_Setup_03_e.fm 15 ページ ２０１１年２月７日 月曜日 午後５時４４分

Casio XJ-M140 Specifications

General

Matrix size	0.55 \
Number of colors	16.78 million colors
Projection distance	1 - 4.9 m
Projection technology	DLP
Contrast ratio (typical)	1800:1
Screen size compatibility	30 - 300 \
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	±30 °
Power LED	Yes
Aspect ratio	4:3
RS-232 ports	1
Dimensions (WxDxH)	311 x 82 x 244 mm
Focus	Manual
Offset	100 %
Focal length range	- mm
Light source type	LED
Service life of light source	20000 h
DVI port	No
Serial interface type	RS-232
USB 2.0 ports quantity	-
Component video (YPbPr/YCbCr) in	0
Analog signal format system	NTSC, PAL M, PAL N, SECAM
RMS rated power	5 W
Placement	Ceiling
Product color	White
Power consumption (standby)	0.4 W
Power consumption (typical)	190 W
Noise level	33 dB
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Cables included	VGA

Weight and Dimensions

Weight	3900 g