CDA WC370 User Manual

Dishwasher Baskets
The upper basket has two different heights available, to allow for larger
products in either the upper or lower basket. To raise or lower the upper
basket:
1. Take hold of the basket handles, as shown in fig. 8.
2. Raise the basket up as high as possible, then lower it down until it stops.
The images below are designed as guidance as to best practice for loading the
dishwasher.
Dishwasher Baskets
To adjust the height of the upper basket:
1. Open the basket retaining clips, as shown in gure 7, but turning them to
the side.
2. Remove the upper basket, and relocate the alternate set of wheels on the
runner, as shown in figure 8, pushing the basket back into place.
3. Close the basket retaining clips.
The images below are designed as guidance as to best practice for loading
the dishwasher.
g 7
fig 8
Upper basket
Lower basket
Bad loads
Alternative basket loads
Lower Basket
Top basket
Faulty loads
18

Alternative basket loads
Lower Basket
Top basket
Faulty loads
18

Lower basket
21

Top basket height adjustment while it is full
Basket height adjustment mechanism on the top basket of
your machine is designed to let you adjust the height of your
top basket upwards or downwards, without removing it from
your machine when it is full, and create large spaces at the top
or bottom area of your machine as needed. Basket of your
machine is set to upper position in factory settings.
In order to raise your basket, hold it from both sides and pull it
upwards. In order to lower it, hold it from both sides again, and
leave it.
In loaded basket adjustment mechanism, make sure that both sides are in the same position (up
or down).
21

Top basket height adjustment while it is full
Basket height adjustment mechanism on the top basket of
your machine is designed to let you adjust the height of your
top basket upwards or downwards, without removing it from
your machine when it is full, and create large spaces at the top
or bottom area of your machine as needed. Basket of your
machine is set to upper position in factory settings.
In order to raise your basket, hold it from both sides and pull it
upwards. In order to lower it, hold it from both sides again, and
leave it.
In loaded basket adjustment mechanism, make sure that both sides are in the same position (up
or down).
21

Top basket height adjustment while it is full
Basket height adjustment mechanism on the top basket of
your machine is designed to let you adjust the height of your
top basket upwards or downwards, without removing it from
your machine when it is full, and create large spaces at the top
or bottom area of your machine as needed. Basket of your
machine is set to upper position in factory settings.
In order to raise your basket, hold it from both sides and pull it
upwards. In order to lower it, hold it from both sides again, and
leave it.
In loaded basket adjustment mechanism, make sure that both sides are in the same position (up
or down).
fig. 8
9
Upper basket Lower basket

CDA WC370 Specifications

General

Door color	Not applicable
Display type	LED
Appliance placement	Fully built-in
Control panel color	Stainless steel
Washing class	A
Noise level	52 dB
Number of place settings	12 place settings
Number of washing programs	5
Water consumption per cycle	16 L
Energy consumption per cycle	1.05 kWh

Weight and Dimensions

Depth	570 mm
Width	596 mm
Height	875 mm