CDA wc431 User Manual

14
Rinse Aid
To Fill the Rinse Aid Compartment
1. Open the rinse aid
compartment by turning and
removing the cap as shown
in figure 6.
2. Fill the rinse aid
compartment until the rinse
aid indicator goes dark, as
shown in figure 7 (where “a”
indicates the compartment is
empty, and “b” indicates
the compartment is full).
3. Replace the cap, ensuring
the markers on the cap line
up with the compartment
prior to screwing the cap
back in place.
Rinse Aid Adjustment
The level of rinse aid use is preset
to 3. You can adjust the level of
rinse aid use by adjusting as shown
in figure 8.
If water stains form on the dishes
after a wash, the level should be
increased.
If blue stains which can be wiped
away are left on the dishes after a
wash, the level should be decreased.
Please note: Rinse aid ensures better quality wash results and
increased drying performance.
Fig.8
Fig.6
Fig.7

CDA wc431 Specifications

General

Door color	Not applicable
Built-in display	No
Appliance placement	Fully built-in
Control panel color	Black, Stainless steel
Noise level	52 dB
Delay start (max)	9 h
Delayed start timer	Yes
Dishwashing programs	Eco, Intensive, Pre-wash, Quick
Number of place settings	10 place settings
Number of washing programs	6
Drying class	A
Annual energy consumption	237 kWh
Water consumption per cycle	13 L
Energy consumption per cycle	0.83 kWh

Weight and Dimensions

Depth	570 mm
Width	448 mm
Height	870 mm