13
fig. 16
Care and Maintenance
Before beginning any care or maintenance, you should always disconnect the
appliance from the electricity supply, and also turn off the water supply.
Door seals
Wipe the dishwasher door seals regularly with a damp cloth to remove
any residues.
Filters
You should clean the filters at least once a month.
1. Remove the lower basket.
2. Turn the microfilter anticlockwise and then lift it out as in figure 16.
3. Remove the coarse filter from the microfilter (figure 17).
4. Remove the base filter from the dishwasher compartment (figure 18).
You should clean and rinse the filters thoroughly before replacing all the
sections in reverse order to that above. The microfilter should lock into
place once it is secure as shown in figure 19.
Please note: Never run a programme without the filters in place.
Incorrect fitting of the filters may reduce wash performance and
potentially damage your appliance.
Spray arms
You should clean the spray arms at least once a month.
1. Remove the lower basket
2. Pull the lower spray arm upwards to remove it.
3. To remove the upper spray arm, first remove the nut on the upper spray
arm by turning it as in figure 9.
You should clean and rinse the spray arms thoroughly before replacing
them. Ensure that the upper spray arm nut is securely tightened when
refitting the upper spray arm.
To deal with an accumulation of dirt, oil or limescale in the dishwasher, run
an intensive programme with detergent when the dishwasher is empty.
Alternatively, there are specialist dishwasher cleaners available that can
be used.
fig. 18
fig. 19
fig. 17
To Next Page
Loading...
Need help?
General
Weight and Dimensions
