CDA WC461 User Manual

9
Rinse Aid
To fill the rinse aid compartment
1. Open the rinse aid compartment by turning and removing the cap as
shown in figure 6.
2. Fill the rinse aid compartment until the rinse aid indicator goes dark,
as shown in figure 7 (where a indicates the compartment is empty, and
“b” indicates the compartment is full).
3. Replace the cap, ensuring the markers on the cap line up with the
compartment prior to screwing the cap back in place.
Rinse Aid Adjustment
The level of rinse aid use is preset to 3. You can adjust the level of rinse aid
use by adjusting as shown in figure 8.
If water stains form on the dishes after a wash, the level should be increased.
If blue stains which can be wiped away are left on the dishes after a wash, the
level should be decreased.
Please note: Rinse aid ensures better quality wash results and
increased drying performance.
Always refill the rinse aid when the rinse aid indicator light on the
control panel is illuminated.
fig. 7
fig. 8
fig. 6

CDA WC461 Specifications

General

Door color	Not applicable
Built-in display	No
Appliance placement	Fully built-in
Control panel color	Black, Stainless steel
Noise level	47 dB
Delay start (max)	19 h
Delayed start timer	Yes
Dishwashing programs	Auto 60-70°C, Glass/delicate, Eco, Intensive, Normal, Pre-wash, Quick
Number of place settings	10 place settings
Number of washing programs	8
Drying class	A
Annual water consumption	3360 L
Annual energy consumption	237 kWh
Water consumption per cycle	12 L
Energy consumption per cycle	0.83 kWh

Weight and Dimensions

Depth	570 mm
Width	448 mm
Height	870 mm