CEM DT-986H User Manual

34
Operating Instruction for Thermal Imager
7.Fault Diagnosis and Exclusion
• If you encounter any problems while using the thermal imager, overhaul according to the following table.
• If the problem persists, disconnect the power and contact with the company’s technical support department.
Phenomenon of the fault
Thermal imager cannot start
Thermal imager shut down
No Thermal image
Cause of the fault
No battery
No power
No power
The lens cap cover
Solution
Inserting the battery
Replace the battery or charge it
Replace the battery or charge it
Opened the lens cap

CEM DT-986H Specifications

General

Brand	CEM
Model	DT-986H
Category	Laboratory Equipment
Language	English