CEM DT-986H User Manual

6
Operating Instruction for Thermal Imager
• Do not get water or salt water on the battery, or permit the battery to get wet.
• Clean the case with a damp cloth and a weak soap solution. Do not use abrasives, isopropyl alcohol, or solvents
to clean the case or lens/screen.
• Be careful when you clean the infrared lens, Do not clean the infrared lens too vigorously, This can damage the
anti-reflective coating.
• Take the Thermal Imager from from cold to hot, it will appear condensation in thermal Imager, To protect the
Thermal Imager, you should power of the Thermal Imager, wait until the Thermal Imager has become war enough
for the condensation to evaporate.
• If you do not use the Thermal Imager, put the Thermal Imager in cool and dry environment, if you store Thermal
Imager equipped with the battery, the power of the battery will be exhausted.

CEM DT-986H Specifications

General

Brand	CEM
Model	DT-986H
Category	Laboratory Equipment
Language	English