DIC Controls and Displays
Turn on the system by turning the ignition to
ON.
When
you turn on the ignition, the DIC will be in the mode last
displayed when the engine was turned
off.
Each DIC
button allows you to scroll through a menu. A blank
page ends each menu.
If a problem is detected, a diagnostic message will
appear on the display. Press RESET to acknowledge any
current warning or service messages. The following
pages will show the messages you can see on the DIC
display by pressing the DIC buttons.
1
FUEL
The
FUEL
button displays average fuel economy and
instantaneous fuel economy calculated for your specific
driving conditions and range.
I
AVERAGE
27.0
MPG
INST.
20.4
MPG
RANGE
220
MI
=
Press the
FUEL
button to display average fuel economy,
such as:
AVERAGE
20.1
MPG or
0
AVERAGE
5.3
WlOO
km
The average
fuel
economy
is
viewed as a long-term
approximation of your overall driving conditions. If you
press RESET in this mode while you’re driving, the
system will begin figuring fuel economy from that point
in time.