2.
Pull the assembly out.
3.
Replace the filter.
4.
Push the assembly back into place.
5.
Fasten the clips.
Automatic Transmission Fluid
How
to
Check
Because this operation is difficult, you may choose to
have this done at your dealer service department. It is
not necessary to check the transmission fluid level.
A
transmission fluid leak is the only reason for fluid loss.
If
a leak occurs, take the vehicle to your dealer service
department and have it repaired as soon as possible.
There is a special procedure for checking and changing
the transmission fluid. Contact your dealer for additional
information or the procedure can be found in a Corvette
Service Manual. To purchase a service manual, see
“Service and Owner Publications’’ in the Index.
I
NOTICE:
I
We recommend that only fluid labeled
DEXRON@-111 be used, because fluid with that
label
is
made specially for your automatic
transmission. Damage caused by fluid other than
DEXRON@-111
is
not covered by your new
vehicle warranty.
To Next Page
Loading...
Need help?
General
