0
0
0
0
Clean up stains as soon as you can -- before they set.
Carefully scrape
off
any excess stain.
Use a clean cloth or sponge, and change to a
clean area often.
A
soft brush may be used if
stains
are
stubborn.
If a ring forms after spot cleaning, clean the entire
area immediately or it will set.
Fabric Protection
Your Corvette has carpet that has been treated with
Scotchgard" Fabric Protector, a 3M product. It protects
fabrics by repelling oil and water, which are the carriers
of most stains. Even with this protection, you still need
to clean your carpet often to keep it looking new.
Further information on cleaning is available by calling
1-800-433-3296 (in Minnesota, 1-800-642-6167).
Cleaning Vinyl
Use warm water and a clean cloth.
0
Rub with a clean, damp cloth to remove dirt. You
may have to do it more than once.
Things
like tar, asphalt and shoe polish will stain if you
don't get them
off
quickly. Use a clean cloth and a
vinyVleather cleaner. See your dealer for this product.
Cleaning Coated Moldings
These moldings
are
around the hatch opening in your
Corvette's rear area.
When lightly soiled, wipe with a sponge or soft
0
When heavily soiled, use warm soapy water.
Cleaning Leather
Use a soft cloth with lukewarm water and a mild soap or
saddle soap and wipe dry with
a
soft cloth. Then, let the
leather dry naturally.
Do
not use heat to dry.
lint-free cloth dampened with water.
0
0
0
For stubborn stains, use a leather cleaner. See your
dealer for this product.
Never
use oils, varnishes, solvent-based or abrasive
cleaners, furniture polish or shoe polish on leather.
Soiled or stained leather should be cleaned
immediately.
If
dirt is allowed to work into the
finish, it can harm the leather.
6-53
To Next Page
Loading...
Need help?
General
