Languages
You can select which language the DIC will display its
messages in. Press the OPTIONS button until the word
LANGUAGES appears on the display, then use the
RESET button to page through the following choices:
0
LANGUAGE ENGLISH
LANGUAGE FRENCH
LANGUAGE GERMAN
LANGUAGE SPANISH
Blank Page
There is a blank page at the end
of
the OPTIONS menu.
When the blank page is displayed, you can access the
following items:
FOB
TRAINING:
This
option allows you to match the
RFA transmitter(s) to your vehicle. You can access this
option by pressing and holding RESET for two seconds
while you are on the blank page at the end
of
the
OPTIONS menu. The message
FOB
TRAINING will be
displayed. See “Matching Transmitter(s) To Your
Vehicle” in the Index.
TIRE
TRAINING:
The Tire Pressure Monitor (TPM)
operates with battery-powered sensors that
are
located
inside the valve stems on each tire. Each sensor has a
unique ID code
so
the vehicle knows the tire location of
the sensor. When the vehicle reaches a speed
of
greater
than
15
mph (24
km/h),
the sensors begin to send the
tire pressure readings to a receiver inside the vehicle.
These readings are displayed when using the GAGES
button on the DIC. If you
are
unable to display your tire
pressures while the vehicle speed is greater than
15
mph
(24
km/h),
you may need to have your sensor ID codes
learned by the vehicle. See your dealer.
DIC
Warnings and Messages
The following messages and warnings may appear in the
DIC display. The DIC display area is located in the
instrument cluster below the speedometer and
tachometer, directly above the steering column. You
may receive more than one message at a time. Messages
will appear one behind the other. To acknowledge a
message and remove it from the display, press
RESET.
You may scroll through the messages that may have
been sent at the same time. The message center is
continuously updated with the vehicle
performance status.
2-97
To Next Page
Loading...
Need help?
General
