Back-up Lamps
The back-up lamps are located in the rear bumper.
1.
Open the trunk.
2.
Remove the two screws.
3. Pull the assembly from the body
of
the vehicle.
4. To remove a socket, turn the socket
counterclockwise and pull it out.
5. Pull the
old
bulb out.
Do
not twist it.
6.
Push the new bulb into the socket.
7. Push the socket back into the assembly. Tighten
the socket by turning it clockwise.
Replacement Bulbs
Exterior
Lamps
Bulb Number
.
Back-up 92
1
Front ParMurn Signal
Front Sidemarker Lamps 194
3357NAK
or
3457NAK
8.
Reinstall the assembly with the two screws.
5-57
To Next Page
Loading...
Need help?
General
