EasyManuals Logo

Chevrolet 2010 Colorado User Manual

Chevrolet 2010 Colorado
438 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #136 background imageLoading...
Page #136 background image
To release the parking brake, hold the regular brake
pedal down. Pull the bottom edge of the lever, located
above the parking brake pedal, with the parking brake
symbol, directly rearward to release the parking brake.
If the ignition is on when the parking brake is released,
the brake system warning light will go off.
Notice: Driving with the parking brake on can
overheat the brake system and cause premature
wear or damage to brake system parts. Make sure
that the parking brake is fully released and the brake
warning light is off before driving.
If you are towing a trailer and are parking on any hill,
see Towing a Trailer on page 5-47.
Shifting Into Park
(Automatic Transmission)
{ WARNING:
It can be dangerous to get out of the vehicle if the
shift lever is not fully in P (Park) with the parking
brake firmly set. The vehicle can roll. If you have
left the engine running, the vehicle can move
suddenly. You or others could be injured. To be
sure the vehicle will not move, even when you are
on fairly level ground, use the steps that follow.
If you are pulling a trailer, see Towing a Trailer on
page 5-47.
1. Hold the brake pedal down with your right foot and
set the parking brake.
See Parking Brake on page 3-29 for more
information.
3-30

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Chevrolet 2010 Colorado and is the answer not in the manual?

Chevrolet 2010 Colorado Specifications

General IconGeneral
BrandChevrolet
Model2010 Colorado
CategoryAutomobile
LanguageEnglish

Related product manuals