Temperature Display
Y b
/ O (On/Off): Press Y b or depending on the
mirror, press
O to turn the display on or off.
To adjust between Fahrenheit and Celsius:
1. Press and hold
Y b / O for a few seconds.
The current unit of measure (F or C) flashes.
2. Press
Y b / O again and release to change the
unit of measure. Wait several seconds and the
compass/temperature display returns with the
selected unit of measure.
It is normal under certain conditions for the temperature
update to be delayed. If an incorrect temperature
displays for an extended period, see your dealer/retailer.
Cleaning the Mirror
Do not spray glass cleaner directly on the mirror.
Use a soft towel dampened with water.
Compass
Compass Operation
Press Y b or depending on the mirror, press O once to
turn the display on or off.
Compass Calibration
The compass may need calibration if:
• CAL is displayed while driving in the vehicle.
• After approximately five seconds, the display does
not show a compass heading, N for North, for
example, there may be a strong magnetic field
interfering with the compass. Interference can be
caused by a magnetic antenna mount, magnetic
note pad holder, or a similar magnetic item.
• The compass does not display the correct heading
and the compass zone variance is set correctly.
3-37
To Next Page
Loading...
Need help?
General
