Hood Release
To open the hood do the following:
1. Pull the handle with
this symbol on it. It
is located inside
the vehicle to
the lower left of the
steering wheel.
2. Then go to the front of the vehicle and locate
the secondary hood release, near the center
of the grille.
3. Push the secondary hood release to the right.
4. Lift the hood.
Before closing the hood, be sure all the filler
caps are on properly. Then bring the hood from
full open to within 6 inches from the closed
position, pause, then push the front center of
the hood with a swift, firm motion to fully
close the hood.
449
To Next Page
Loading...
Need help?
General
